Find an experienced concreter in WA

Limestone retaining up to 1500mm high for carpark.

Lime stone wall with pillars

Wanting drive way 15x6 mtr of concrete Alfresco 6x9 pavers Path 9x1 concrete Removed no set date yet looking for quotes before pour new concrete. Budget is not set just random number. Thanks

Slab dimensions: 3,2 m x 2.4 m Concrete quantity: 1.1 cu. m. Concrete quality: To meet Buildingm Code requirements: at least 22 MPa 28 day strength Site will be formed with re-bar mesh in place ready for concrete.

I only have access to the back of my block through the vacant lot behind me, my block is approx 500mm lower than the vacant block and I need approximately 13m3 of sand removed in preparation for concrete. I need a fall from the house to the limestone blocks at the back

Supply and install approximately 6 x 1/2 size natural limestone blocks to match existing wall.

I need about 50metres in length (1.5m wide) paving to be done in my backyard - I have sourced most all of the paving material already. In addition I need a small limestone retaining wall done (under 1.5m height as an absolute maximum and in a curve and about 12m in length) plus a knee high limestone garden bed about 12m wide to be made on the side of my flat and solid patio - to be built with a space in the middle for a bench etc for a BBQ area.

Looking for someone to concrete my verge. Looking for quotes. Google Earth 37.25 m2.

Looking for quotes at this stage for a concrete driveway crossover, Area of 5 x 2.8 metres. Must meet council requirements for city of Armadale.

An area around 25m2 requires concrete

Supply, install & finish 100mm thick N20 concrete with SL102 steel reinforcement to partial driveway area 1430x5900mm. Existing damaged section of concrete will be removed by others ahead of agreed date for the job.

Jackhammer concrete approximately 1m long to hide waste/drain pipe.

Small garden bed limestone wall needs rendering. 300mm high, 22 lineal meters

Ideally will need a bobcat to do the job in a time efficient manner I have a side flowerbed edged with limestone. I need half of it removed and then 3 or 4 of the limestone blocks repurposed to close off the remaining half. I would like the area removed to then be concreted flat. I also have a verge I would like levelled. With the same bobcat I think this can be done relatively quick.

I need my driveway cut down a bit. Only a small quick job roughly 2m2. Drive way has steel in the concrete. I've attached photo with the black outlining where I want cut and removed. Just one straight cut.

Three steel posts with concrete bases to be removed

Need some concrete filled to edge of the fence similar to photo attached. Will need to clear the area and fill and level neatly. I can buy the concrete if you tell me what to get or you can and I reimburse. One sunken paver also needs to be fixed if possible.

I have 90 limestone blocks to be moved to the backyard. Blocks are 500x250x150 approx 33kgs each. They have also been delivered to wrong house number, 3 not 4, across the road. Has plenty of access for a wheelbarrow or trolley. - Due date: Needs to be done on Monday, 22 January 2024

Already bought 30 or so blocks need to be properly laid level 2 blocks may need to be cut for the corners - Due date: Flexible

Remove 2 x limestone/concrete blocks - pretty heavy, may need to break them to make it easier. - Due date: Before Sunday, November 26, 2023