Find a fence installation professional in QLD

Need supply and install timber fence , gates including all accessories with galvanised pole. Refer the picture for measurements.

We need someone to and reinstall our timber side gate. We may need a new timber post for it as the existing post may be too rotten, so a trip to Bunnings / timber yard may be required. Need it done very soon so our dog doesn’t escape

I need pool fence glass installed, we have the spigots and glass etc just need someone to install it- it is going where the holes are not at the front of pool where canal is and one sheet at the other side. Pls quote

Re-posting this task as previous tasker tried to increase price by $230 so i will be extra clear with my requirements. 1. I need a new timber side fence built and installed, using brand new treated timber, not 2nd hand leftovers you have have from another job. The timber side panels need to be replaced also, as circled in blue. The timber must be painted green as per body corp requirements 2. This task price includes supply of all materials including masonry, bolts, latches etc. 3. I require the old timber fence and old timber side panels to be removed and taken off site by you. This is not negotiable. 4. You need to communicate with me a time that will suit both of us, don't just tell me when you will be turning up to complete the task. Please have some social skills. The old gate is approx. 950mm wide and 1700mm high. You can use a steel frame or make it from scratch if you wish as long as it is sturdy.

Need to replace a steel post on carport from ground to carport is roughly 2.5 meters Steel post is currently rusted at the base

Install 47m aluminum pool fencing including 5 gates onto concrete slab. Materials provided. Need done asap. Located in Bahrs Scrub.

Hi need someone to build a gate for the side access. Total width is around 2.5 meters. I can provide the materials.

Install a net to stop tennis balls from going over the boundary wall. The existing net is too low. Ideally id like the net to be 5 metres high. The length of the wall is 16 metres.

I need a pool fence panel installed between a timber fence line and brick wall. It needs to be complaint. I have the panel and it’s been already precut to the best of my ability. I have two poles too if needed but no brackets. Would prefer someone who specialises in pool fences. Please see photos

Need 13 panels of temp fence installed on my boundary line. Plus feet and top brackets . Have all materials already on site. It is a sloping site so experience in fencing would be good . Definitely a 2 man job but only a day’s work involved .

Need two 400mm high (2x sleeper height) timber sleeper retaining walls installed approx 500mm off the back boundary. One is 5.5m long and one is 6.6m long. Need posts concreted into ground properly and timber sleepers attached to posts. Good access as currently vacant block. Tasker to supply all materials and labour required. Posts can be steel or timber. No excavation or backfill required (just digging of post holes).

I have everything you need just need someone to build the the steel gate and put wooden pailing on it

Side gate was removed to allow for earth moving equipment to pass by. Most pine pailings, steel post and gate are ready to install. Concrete will be required.

Wanting to get a picket fence installed in my front yard. 3 post are already in would need possibility 2 more put in. Roughly about 1.2m high with a gate if possible. About 15m in length

We have materials just require assistance in constructing the Pickett fence (rest will be chicken wire to enclose area for chickens). We will need help digging holes for fence posts but will require someone with their own tools (ideally nail gun and saw if possible? ) Length of fence approx 2.7m

I need a 6m x 3m dog enclosure built, with a gate. I'll buy the fencing and gate from bunnings.

A handyman is required to install colorbond fence and a small patio. 60 bucks per hour will be paid. Minimum 3 hours. All materials supplied.

Build timber fence (treated pine) extension to be installed on existing colorbond fence as per photo. Install on one side of fence only. Solid timber 100% privacy 2 x ( 2400mm x 500mm) Quote for materials, build and install

I need two D&D Tech garden gate locks installed to a Colorbond fence/gates. Install only. Someone who has done this type of install before is preferred. You must supply all the necessary tools. https://au.ddtech.com/products/lokklatch-magnetic

Would like a privacy screen to section off the end of my deck on my granny flat as well as a pedestrian gate to keep the dogs in the yard. Refer to photos for dimensions.