Find a fence installation professional in VIC

8m of fence line needs to be replaced beside my driveway. Easy access.

I would like to have a temporary fence in this area from wall to wall with door to go in. From pallets or bamboo panels maybe?

Install Screens, Dig hole for each pine post, concrete hole after installing pine post, total of 5 or 6 post. must fit and install; garden screens to post (please see images )

Fence replacement, removal and disposal of existing fence. Length around 14m and height 2.1m

Need 60 panel’s of bamboo installed tuesday

Gate - Supply & Install. 1200 high * 900 wide. Metal frame, metal hinges, with vertical timber boards in same style as existing fence. Further, vertical gate release and return spring required (refer to the pictures supplied).

To install lattice fence extension to increase the current fence height of 2.2m to at least 2.4m. The length of extension required is approximately 15m.

Dig 2 x post holes, concrete in, install fire stacker attach to posts.

I need a boiler maker/welder with experience in metal fencing to install 2 fence panels and a pedestrian gate at the front of the house. Work includes some welding, bracket fixation into metal with screws and metal that needs to be cut/trimmed. 1. Pedestrian gate – 2 sets of hinges to be screwed into the metal post (picture 1). Strike bar to be screwed into the opposite metal post with one part of the metal that requires trimming and a hole created for the gate latch bolt (picture 2). 2. Fence panels (2 panels) to be installed. The fence panel brackets will need to be screwed into the posts (4 brackets). The fence panels are slight wider and require trimming of the overhangs (horizontal bars) prior to attaching to the fence panel brackets. Both panels are attached to the larger post on each side. The other side of these panels are to be joined to the intermediate (smaller) post in the middle. This will require welding (picture 3). 3. The skirting of the posts (3 sets) will need to be welded on the foot of each post (please see picture). There is rear access for parking. There is no parking at the front of the house. Preferable this Saturday (04/05/24) or Sunday (05/05/2024).

Install new fence 4 sections each one is 1.2m, the other three sections are 2.1m.

Want to make two small enclosures for keeping dogs in the salon I have purchased two gates, hinges from Bunnings, need to divide them also unsure what other materials will need to come and see

The fence needs to be fixed. 250 meters wide

Install colourbond fence. Woodland grey 2.7x 1.8 Currently a broken timber fence.

Existing brick post at front of property has been dislodged from its original position due to a vehicle nudging it. The post measures 48cm x 35cm x 130cm. Scope : - Rebuild post using existing bricks only, for arsthetic reasons. - All other required materials and tools to be supplied by Airtasker.

Need to have one of the panels of my fence replaced as it was damaged by my dog jumping into it. Measurements of panel is roughly: 860cm x 1770cm

Looking to replace my old pine fence with a new and similar one. Located in the front of the house. 27m length 1.6m high Removal of old fence No gate needed

6 or 6 1/2 bamboo panels to be installed on my existing fence. Bamboo panels size 2 meters tall and 1 meters wide. I will buy the wood and screws. You only tell me the labour charges. I will give you a hand in fitting.

Need help in installing a Bunnings 3.3m aluminum fence

$35ph Female or male to help build timber paling fence. Must be fit. Bring your own PPE. We supply materials and tools.

Replace existing boundary fence with new paling fence. Required height 1.6m. Length – approx. 12.5m. Budget includes supply of materials.