Find a professional hot water system contractor in North East Melbourne
Fill in a short form and get free quotes for local hot water system contractors in North East Melbourne
Excellent rating - 4.5/5 (9200+ reviews)
Looking for hot water system contractors?
- Gas system
- Electric systems
- Boilers
- … or anything else
Best rated hot water system installers near me
Latest Review
"Thanks so much! Fast and great work "
Verified Badges
Digital iD Verified
COVID-19 Vaccination Verified
Mobile Verified
Latest Review
"Great customer service"
Verified Badges
Digital iD Verified
Mobile Verified
Latest Review
"He came done job And pleasant to work with"
Verified Badges
Digital iD Verified
Mobile Verified
Latest Review
"Excellent communication, efficient and professional. Detected gas leak right away and didn’t take long to fix. Highly re..."
Verified Badges
Digital iD Verified
Mobile Verified
Latest Review
"Very professional and nice "
Verified Badges
Digital iD Verified
Mobile Verified
Latest Review
"Really helpful and got the job done! "
Verified Badges
Digital iD Verified
Mobile Verified
Latest Review
"Very quick and efficient great work with choose him again"
Verified Badges
Mobile Verified
Latest Review
"Great work! Highly recommend him"
Verified Badges
Mobile Verified
Recent Hot Water System Installation & Repair reviews in North East Melbourne
Reliable and good communication throughout. Would highly recommend.
Plumber- Solar hot water pannel needs disconnect
$100
Very good service. Super fast and super efficient. The best
Need a plumber to have a look at hot water
$50
Mark was very friendly and managed the job expertly. We are super happy with the new gas hot water unit. Communication was fantastic and he arrived on time. Thanks heaps Mark!
Supply & install new natural gas hot water system
$1,300
Ben was great! He completed the job quickly and was very lovely to deal with. I highly recommend him!”
To Fix Water liking from hot water pannel.
$50
Billy explained the situation well and completed the work perfectly. I d highly recommend him.
Install a non-return valve to the hot water system
$50
Came out straight away - good work, well organised. Very happy.
Fix hot water system, assess drains
$400
What's the average cost of a hot water system installer in North East Melbourne
$100 - $299
low
$100
median
$180
high
$299
Average reviews for Hot Water System Installation & Repair Services in North East Melbourne
based on 75 reviews
4.95
What is Airtasker?
Post your task
Tell us what you need, it's FREE to post.
Review offers
Get offers from trusted Taskers and view profiles.
Get it done
Choose the right person for your task and get it done.
- Get it done now. Pay later.
- Repay in 4 fortnightly instalments
- No interest
- Available on payments up to $1,500
Related Services near me
Top Locations
Sydney Hot Water System Installation & Repair
Hobart Hot Water System Installation & Repair
Newcastle Hot Water System Installation & Repair
Brisbane Hot Water System Installation & Repair
Geelong Hot Water System Installation & Repair
Canberra Hot Water System Installation & Repair
Ballarat Hot Water System Installation & Repair
Parramatta Hot Water System Installation & Repair
Perth Hot Water System Installation & Repair
Adelaide Hot Water System Installation & Repair
What do hot water system installation services include?
Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.
Inspecting installation area
Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service.
Preparing for installation
Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.
When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.
Installing the cylinder
Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.
Installing components and pipes
After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices.
Testing the system
Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes.
They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.
Recent Hot Water System Installation & Repair tasks in North East Melbourne
Troubleshoot and fix issue with Rheem gas hot water system
$200
Reservoir VIC, Australia
5th May 2024
My Rheem continuous hot water system (came with the house I recently purchased) seems to be on the blink. The hot water from the taps works fine, but the hot water from the shower shuts off after a few seconds. The system itself is flashing the codes C9 and 65. I’ve watched the system with the shower on, it seems to heat up and blow out hot air for a few seconds and then continue to run but the air becomes cold.
Gas hot water power cord needs replacing
$100
Donnybrook VIC, Australia
20th Apr 2024
My friend's dog chewed up the power cord that connects the hot water tank to the mains gas. I am not a sparky and don't want to pretend to be one either ;)
Ishaaq was excellent. Good communication. Job done on time. No hassles at all.
GAS HOT WATER TANK REPAIR
$10
Olympia Ward VIC, Australia
27th Mar 2024
Today I re-flared the copper pipe to the hot water outside elbow bracket, as it was leaking. Then after the successful repair, there was no hot water running to any of the taps. and yet, the heat setting was on 4 of 5, on hot, gas pilot light on, the normal occasional steam, touching the hot pipe that was just repaired was warm, as per normal. Question: why is no hot water coming through the pipe? Possible answers in my opinion: thermostat, dip tube or the 30year old unit has had its day (which over the last three years the water temp has been dropping to the same heating gauge setting on the dial). Also released the pressure release valve: nice hot pressure water was released. See pics! Adrian.
Cody is a cool cat, smooth operator with a great work ethic. So glad the young roar like him…
Electric 50L hot water unit
$5
Epping VIC, Australia
21st Mar 2024
Small instantaneous electric hot water service has stopped heating water could be element or heat exchanger has a problem , the unit is less than 1 year old
Small instant hot water system stopped heating
$5
Epping VIC, Australia
20th Mar 2024
Have a small hot water service in a warehouse that has stopped heating water it’s less than 1 year old
Repair my gas hot water system
$150
Mernda VIC, Australia
14th Mar 2024
My gas hot water system is not working !!
Great service !! Eyes on detail
Need Install hot water and sink
$300
Ivanhoe VIC, Australia
9th Mar 2024
Need someone can drill a hole in the ground next to the blue pipe, to connect to the hot water pipe in the building. Then install a sink basic with a tap for hot and cold water. Need to have work cover .
Repair Hot Water System
$100
Epping VIC, Australia
9th Mar 2024
Inconsistent water temperature
Good service and looking for more work.
Fix hot water service - chromagen
$500
Mernda VIC, Australia
26th Feb 2024
Hot water is not running in taps with desired temperature. It’s a solar tank with natural gas (Chromagen)
Install bathroom light, extractor fan, hot water timer, remove switch
$600
Preston VIC, Australia
19th Feb 2024
Need an electrician to: - Remove my current light, heat lamp and extractor fan, then patch the roof where it was - Install a new light - Install a new extractor fan. It's a smaller fan, it can also be setup to work automatically with a humidity sensor which is what I would like - Remove a external powerpoint that is in the bathroom. The power point is It is setup for just the heat lamp and the fan. As the new light does not have a heat lamp and the fan will now be automatic it is no longer needed. It is currently connected by a conduit into the roof so this can be removed, and the small hole in the roof patched. - Install a timer that connects to my hot water. I have solar panels and I would like my hot water to only heat up in the middle of the day or outside of peak times. Note: I think I'll need a new smaller safety switch/curcuit breaker for something else in my switchboard so the timer fits in. This will need to be supplied. Included are photos of the old fan, the switch, my switchboard, the light, extractor fan and the timer. Happy to negotiate! Any questions let me know!
Install an electronic hot water unit. 10m of cable 3m of plumbing
$1,400
Reservoir VIC 3073, Australia
14th Feb 2024
3m of copper approx 10m of cable from the electronic box approx Disconnect the old unit in the roof, there is a man hole Just to be installed in the back yard It will be a 125L Unit
Tap issue and hot water pipe issue
$100
Mernda VIC, Australia
30th Jan 2024
1 . Tap issue near footpath 2.Licking hot water pipe - Due date: Needs to be done on Wednesday, 31 January 2024
Great service , it is the best service
Install a 125L Electric Hot water unit
$1,450
Reservoir VIC 3073, Australia
25th Jan 2024
Need a plumber and an electrician. About 10m of cable from the main box. The old hot water unit is in roof not far from where new unit is to be put. It's a Dux. Need it done asap - Due date: Flexible
Gas hot water system is not working
$100
Epping VIC, Australia
20th Jan 2024
Gas hot water system stopped working all the sudden. Need someone to fix it - Due date: Needs to be done on Saturday, 20 January 2024
Cody is very quick to respond and friendly. Issue was resolved temporarily as required
Hot water system installation
$10
Thomastown VIC, Australia
17th Jan 2024
Need some someone to provide and install a hot water system for a 2 bedroom granny flat - Due date: Flexible
Gas hot water system service
$150
Bundoora VIC, Australia
27th Dec 2023
I notice on hot water system that hot water is leaking. I am not sure if there is a problem with the valve or something else. I would like someone to look at it. - Due date: Needs to be done on Thursday, 28 December 2023
Excellent work. I recommend him any time. Thank you.
Hot water not working electric unit
$100
South Morang VIC 3752, Australia
18th Dec 2023
Anytime fitness south Morang, Electric hot water unit not working as no hot water coming from showers or handwash - Due date: Before Wednesday, 20 December 2023
Slow leak from pipe in hot water service x2
$300
Wollert VIC, Australia
16th Dec 2023
There are two hot water services that require attention. One in Mickleham and the other in Wollert. The one in Wollert has a flexible hose that has a small crack in it and sprays a mist of water. Pipe requires replacing. The HWS in Mickleham has a small hole in the copper and requires patching. The amount is for both jobs combined. Require the works to be done by a licensed tradesperson. - Due date: Flexible
Quick and efficient
Repair Hot water unit
$250
Lalor VIC, Australia
12th Dec 2023
I had a hot water unit that stopped working. This job is urgent and needs to be fixed on or before 14.12.2023. Please refer to the attached photos for more details. - Due date: Before Thursday, 14 December 2023
Help move a large hot water tank
$130
Whittlesea VIC, Australia
20th Nov 2023
Assist removal of old hot water tank and moving new one into position. 9am start, 1/2 hour job. - Due date: Needs to be done on Tuesday, 21 November 2023
Bailey was excellent, on time, motivated and did a great job.