Find a local excavator service near you

I have two sprinkler systems and I am not able to use either one. I’m open to offers to revive both systems or just one or the other. have severe arthritis, it affects both hands. My bore system has very old taps, and I am unable to use it at all. I would like to have them upgraded. A few of the sprinklers need replacing, a general spruce up. I don’t know a great deal about general bore water system maintenance. But if it’s due for a back wash then I would consider doing. I require any tasker to have a ABN number and provide a written quote. The quote should include a provision for the tasker to obtain all parts and materials required to complete the job. I’m flexible with day/time and the figure offered is for the initial engagement process.

8 holes to bore - (4 on each pole) must have own drill that can handle the task. 10 mm bore bit. Stair rail already assembled.

I need to run an irrigation pipe under my path to a garden bed

My bore works . I need solenoid repair and sprinkler repair

I would like to install bore water filter system that removes iron from the water. 0.56mg/L is the iron content now and I would like to drop the iron level to 0.3mg/L

Need experienced water bore driller to start work ASAP.

Require hole to be bored for SHS post to install shade sail. Will only require portable 2 man borer/ auger with 1m extension or small dingo

Can’t on my sprinkler. Maybe bore issue

Had our bore guy out, he suggested a electrician

VAG CDAA engine 1.8 TSI still in car, head removed, pistons still in. Need bore measurement on all 4 cylinders to verify condition and sizes for replacement pistons. Nominal diameter 82.51mm. Can crank it to expose bore. Want to verify it is worth with proceeding with piston removal and ongoing fixing. Car is in the garage, power available for additional light. I have LED overhead light.

Repair of bore with a tripped breaker. It was working at the beginning of the week but now tripped every time. The bore was in place for 3 years. Am using a Hunter controller. Could be the breaker or the pump so am flexible on the charge depending on the diagnostics.

Hi require new bore instillation please Based on my address These are the requirements DRILLING METRES: Depth to aquifer (m):5m DEPTH OF BORE (m): 18m SUPPLY AND INSTALL PUMP Please provide price and pump model Thank you

Service water bore. Suspect it requires new check valve ftted

I need a hole drilled for bore water Water is at 18 metres Need drilling to 25 meters and lined I have the rest of the gear required

I have ugly light fittings that look like this at my house and I just bought a chandelier that needs to be hung . - Due date: Needs to be done on Saturday, 20 January 2024

I'd like the top of my bore well to be cut (or top section removed from the rib), and a lid capable of being buried supplied/installed. The bore well is quite deep (5m or more I'd say), the dimensions are approx 1100mm internal diameter and 1195mm external diameter. - Due date: Flexible

Replace a check valve and pipe section connecting it to a bore pump - Due date: Before Sunday, 7 January 2024

Holes to go through ceramic tiles into (dry) concrete pool edge for installation of 1.8 m long, 38 mm dia rail beside pool Due date: Before Friday, 19 January 2024

two points of leakage in retic pipe, we have bore water in use if that makes any difference - Due date: Flexible

need a basic lever lock and latch bore mounted onto this backyard door so it can close and open freely from the inside and outside. don’t necessarily need it to be able to be locked as I will put a latch on the inside. Want something like this shown in picture. There’s no signs of drills or holes on the side of door so everything needs to be done - Due date: Before Thursday, 14 December 2023