Find an experienced builder in Ascot Vale

10m approximately prefer wood Need retaining wall about 40cm high as part of fence Disposal also required

Picket fence, pedestrian gate, sliding driveway manual gate (3.3m) Total 8m frontage Thankyou - Due date: Flexible

Need a small brick wall fence built in between a house and shed. Roughly 2.45 metres wide X 2 metres high We have a the recycled bricks Due date: Flexible

Build a brick letter box up to 500 bricks, no concrete pad required - Due date: Flexible

Our driveway was ripped ups to complete plumbing work and now we need concrete to fill the current gap. Not sure what the pricing is for this kind of work so feel free to quote what is appropriate. - Due date: Flexible

safe and secure Easyshed installation in the backyard. Small shed. Model Photo attached. - Due date: Flexible

I am prepping to paint my house and it needs to be pressure washed to get rid of all the cobwebs/dust etc. all windows to be cleaned, driveway to be cleaned as it will be painted. Garage also to be pressure hosed down. Also under the front porch and front door. I will have anything you see in the photos like plants, furniture, rubbish etc all moved away from the house and off the driveway to make it easy to do. - Due date: Before Friday, 10 February 2023

We'd like a new pergola built in the same footprint as the existing one, with some slight style moderations. We have footings for the posts to sit in (that will sit on top of our paving). Some care is required not to damage the heritage brickwork that it's attached to. It's L shaped and wraps around the house, is about 4m x 2m on one face, then around the corner about the same.

Currently there is a wooden patio with shade cloth at the top but we would like a quote for something to cover it to protect underneath from the weather. Open to suggestions if the wooden edges need to be replaced and/or adding a blind or cover to pull down on some of the sides to protect from weather. - Due date: Flexible

Hello, We are in Ascot Vale and need two sheds assembled. 1. Skillion Roof Shed 1.50m (w) x 2.25m (d) x 2.10m (h) on brick pavers. 1 Skillion Roof Shed 2.25m (w) x 1.90m (d) x 2.10m (h) on soil ground

I need 12 cubic meters approx of soil shovelled from my drive way to the back yard. The soil needs to be evenly distributed into 14 veggie boxes. The soil is all on the front drive and the veggie boxes are about 40 meters approx down the back yard. See photos must be completed in the one day. Tomorrow. Tuesday. Would be better to have two men for the job. I have wheelbarrows for you to use. Thanks

**All work can be completed outside, can be done any time before 23/10** We have a 2.7m driveway and need a new double gate - in kind of a hurry! Keen for it to match our opposite side gate which is just a Bunnings timber purchase. The height of the gate on the other side is 1800. A bit higher this side would probably be better.

DETAILS I need help for a bathroom, Laundry and Kitchen demolition in a 2 bed room apartment and rubbish removal job - in Raleigh road, Maribyrnong. This involves demolishing existing kitchen benches, tiles, bathroom’s wall tiles, shower screen, toilet, basin and little laundry area. See pics attached. I need all demolition waste removed. I believe this job will take not more then 1 working day and happy to discuss further scope and rates. Thanks with best regards MD

I need bunning gazebo, portsea louvre lava 3m x 4 m installed in my back yard.

I bought a new Absco Shed from Bunnings. See attached picture. Its a DIY Assembly however I don't possess the tools or skills to assemble it myself. I would like a tasker to assemble/install to an existing paver base. Tasker requires own tools as well. Tools listed are Power Drill 3mm drill bit 10mm drill bit Masonry Drill bit Rivet Gun Adjustable Spanner Dimensions 1.95m h x 1.52m w x 78cm depth I am ok to provide help labour Ideally completed this weekend at Ascot Vale.

When I flush my toilet it rises to the top full of crap

Need to finish off my shed install and I’ve injured myself and can’t finish it. Walls are done. Must have a rivet gun. Just need the roof, brackets and front doors done on my 3m x 2.25m shed. See pics. Note that one section of the roof is already on and need a couple more screws and alignment. Need done tomorrow to work in with my landscaping.

My remote gate (sliding) is getting stuck somewhere and not opening/closing. Motor is only 2yrs old. Likely an alignment issue between track and cog. Hoping easy for someone experienced in these gates to problem solve this (I can assist).

Need to install laser lite roofing to pergola. Will need battens installed to provide fall, needs gutter and flashing. Size is 2 x 8 meters.