Find experienced local carpenters in Caboolture

Need our Easyshed to be installed. It has already been delivered and slab is down. Shed is 3x3m. Easy site access on acreage property.

Need to install the garden shed and gazebo in my backyard hope it gets delivered before Thursday the pics shows the dimensions of above mentioned installation (need some one who has done similar jobs before)

Water damage from a slight leak has left a tiny stain. Just needs a paint.

Some construction labouring experience preferred but fairly easy work building totally prefabbed simple granny flat / shed. All frames and sections are lightweight and prefabbed and its mostly carrying the lighweight frames that are easily carried by 2 ppl and screwing. Hourly etc etc can be arranged after onsite meet.

Shed is 10000m span x 18000m length x 4500 height. 2 Roller doors and 1 PA door. Slab is already done.

Have just had wardrobes ripped out that has left a large gap. Am wanting it resheeted and patched. Will be needing 3 bedrooms and linen cupboard done.

I’m looking for someone who can build basically what’s shown in this image however will need to be in white and I’m looking for 4 of them

Make a step out of sleepers to match. Will need to be fixed to it and have cut outs on the bottom to allow water to pass under.

Once the shed has been delivered I need it put together and fixed to the cement slab

Need a stand built for a reptile tank Flat top and thicker than 10mm Total weight of tank would be 70kg Stand can be made of wood and include delivery to Caboolture near drakes Cheers

Build a bird aviary, some already put together, all cutting and some rivot done, mostly minor assembly required

We have an old stone benchtop to be removed and new laminate top to go in. This task will include removing benchtop and sink/tap(not glued down). Cut new benchtop to size and add edge stripes where needed. Sink/tap cutout to be done and silconed into place and silconed to tole bachsplash. Benchtop is 2560x600 and 720x600. - Due date: Flexible

I have a 1.5 x 1.5 shed that I need to go up. Base ready to go. Unable to offer any real help.

I have a new zincalume shed bought from bunnings that I want erected and fixed to a poured concrete pad. 3.00mW x 1.52mD x 2.06mH. - Due date: Flexible

I’m a welder with a lot of experience I can tig mig and stick and aluminium, stainless and steel. Anything metal message me and sort something out for you - Due date: Flexible

Replace cupboards with drawers - Due date: Flexible

I need 4 walls build ideally out of plaster board but anything cheap will do that looks better then it is n more roomy. Only temporary walls. Even just the right size materials and I can nail boards up myself. Thanks any help appreciated Contact me with any questions. roughly 5 x5meters. Only 1 wall needs a-few possible braces (photo ref: Black hanging mate with painted red & blue camping table in front) - Due date: Flexible

I have small Garden shed that I need put together. It's 99cm wide and 104 cm high. - Due date: Flexible

Build 2 walls 7mx4.6m with 2 doors - Due date: Needs to be done on 2023年10月27日 星期五

I have a new rangehood and need the cabinets where the rangehood is to be lifted up 60cm as the new rangehood will make it too close to the cooktop. This job will suit a carpenter or cabinet maker who is looking for a small job. - Due date: Flexible