Find trusted local electricians in Frankston

Hi there, i have some lights to get down about 5-6 and replace them with downlights, in 3 rooms and kitchen. Got some work done and need to isolate 2 cables. Check the power point because safety switch go off as soon switched on (might be to do with isolating the 2 cables). Remove some old power points and add a few. Happy to organise a inspection for a proper quote. Thanks

I have a 25L Thermann electric hot water unit that I need plumbed in my garage. Cold water tap currently on wall. I want to branch off from here and: 1. Maintain a garden tap 2. Feed the thermann unit 3. Plumb into a sink Need a licensed plumber to do the work for the certification.

electrical checks for switchboard and fixtures/appliances, smoke detector & laundry smoke alarm for 23 studios. it should be one day job.

Have three bedrooms currently with fan lights, but wanting to remove the fan and have 4 downlights installed in each bedroom. Currently unsure what this kind of work might cost

Hi - i am installing a home office in my garage -i am looking for an electrician to come have a look at the current power set up in my garage - advise what solution is best - i can then suppy all the cabling and run it to position and then i would like to get the eletrican back to complete all connections and wiring of plugs/lights etc

Remove old 50L 3.6kW electric hot water unit and install a new one. Hot water unit locates inside the apartment on the first floor Existing hot water system isn’t compliant so will require tempering valve, Mildred valve and safety tray, similar to the last photo.

All new power points supplied at property,,,needing to replace old power points with new ones,,,range hood power point to be fitted,, and one new power point to be fitted,,,mainly in kitchen area

Removal of old Lennox split system in one room and installing and new split system- located upstairs Installing a split system in downstairs room

Electrician Certificate needed 1 storey house Install 2x small pendant lights in bathroom. Change current light/fan switch to a 2 gang switch to add the pendants on one switch and have the current light/fan on other. Pendants is close to switch. See picture where pendants go and switch I have the pendants and the 2 gang switch.

Move light/fan switch to the wall in picture.

1. Install 3 wall lights. See picture for the wall light 2. Move light and fan swith to other wall. Instead of one switch I would like 2 on it. One for the current light and fan and the other for the three wall lights.

Adding power points for ease of use and safety in both the house and the garage. - Due date: Before Thursday, 29 February 2024

Accidental damage of switchboard, it needs to be realigned to the ground and make sure it's working properly. Power is working.

Looking for an experienced electric gate installer, to install existing parts for front driveway gate. I have the following: Gate Runners Motor – this is the description https://www.centsys.com.au/d10-industrial-sliding-gates/ Posts and all other parts Nearest electrical point would be about 15 metres away and no current power to front gate If you could drop a message with any further questions or estimated price and availability to install that would be great - Due date: Flexible

I have 10 of these outdoor lights that need to be wired in. I need them to be on 2 different circuits / 5 on one switch and 5 on another. Needs to be done in next 36 hrs Lights are these https://www.micalighting.com.au/roma1-diy-spike-light-black.html - Due date: Needs to be done on Monday, 18 December 2023

Replacing 12 existing lights with 22 down lights. More lights being then replaced. - Due date: Flexible

Need a sparky to add new circuit from switch board to the new ducted A/C unit. House Type: Single Story, Brick, Tiled roof. I dont know what a fair price should be. please advise. - Due date: Before Thursday, 21 December 2023

Need a powerpoint installed for a dishwasher - under the kitchen sink. Needs to be licensed sparky, definitely more work to follow (replace dated circuit board etc.) - Due date: Flexible

Install the following products that have been supplied: 14x Jinko 440 Watt 108 Cell TIGER NEO Mono-Facial N-Type 30mm Black Frame Solar Panel 1x Sofar 5kW 3 Phase Solar Inverter With Dual MPPT Dual Built In DC Switches & WIFI Dongle Screws and mounting brackets will all be included - Due date: Flexible

Construct a portable silencer box for a generator to reduce decibel noise for coffee cart - Due date: Flexible