Find trusted local electricians in Kellyville

Need to install lights outside, on my my front wall. There is not cabelling done on the wall. I have marked the pic 2 in red where I want the light. Sample picture of the lights shown in pic 1.

I need someone to replace the following faulty items: 1. One single downlight. 2. Two light fittings, one in each bathroom. Only the existing fixtures are to be swapped out; no new installations or wiring are needed. I have all the necessary lights and fittings.

I have an existing outdoor light circuit currently powered by a 3-pin plug into an outlet in the outdoor MSB. I want to cut the plug but wire the existing cable directly into the MSB (penetration on the bottom of the MSB and use an outdoor weather proof gland). This could be done either into an existing lighting RCD or installing. A new RCD dedicated for this circuit. I will need a price for both options. I will work from home tomorrow or next Wednesday, hence requesting this job done in either of these two days, ideally tomorrow.

15 white led downlights approx 9W.. how much per downlight?

I want to install Electrical flood light it needs electric point. In my side yard

I have a Kleenmaid stove top that always trips the circuit breaker every time we use the spark.

Need few drivers of led lights changed and to move the position of switch boards

Electrician job for replacing 6 ceiling lights . Refer pictures

A double power point installed , between two existing power points, on a gyprock wall on the inside inside of an external cavity wall.

1. Get more downlights in garage. 2. Get an Aircon done in garage. 3. Downlights in temple. 4. Fix the lights above Island Bench. 5. Change the light at bathroom heat unit. 6. Add a couple of Power points.

1. Relocate a 9-port Ethernet cable hub to the opposite side of the current wall. 2. Install five new Ethernet cable runs to each of the four bedrooms + rumpus on the same floor, and install new Ethernet RJ45 port sockets for them all, on wall plates at either ends. The cables will be run through the ceiling and connected to the new central hub. 3. Install four new electrical power points at the new hub location. Install two new electrical power points at the old hub location and a RJ45 data port. 4. Install four CCTV cameras. NO new cabling or additional power supply needed. All necessary infrastructure is already in place.

Need auto electrician to add wiring for new Mitsubishi pajero sport from 7 pin to 12 pin to accommodate a 3 way fridge on caravan

Hi All, I have an electric sit stand desk that has stopped working properly. It sometimes even moves on its own. But mostly just doesn’t move up and down when plugged in. The light turns on but no movement. Hoping someone could help repair this? Thank you

I have 20 downlights, 10 cm width which are required to be installed. 16 downlights on the lower floor and 4 on the upper floor. Wiring and all needs to be done. See images. Lights to be installed - DUSKTEC Recessed Spotlight LED RGB Dimmable 10 W, 230 V LED Spotlights, Colour Changing, Set of 4, 95-110 mm Hole Size Spotlights, Colourful App, Blue

Electrician to replace audio system I want someone to help me replace my mazda 3 audio unit. - Due date: Needs to be done on Wednesday, 21 September 2022

I need a licensed cabler or electrician: For a two storey building; supply and install NBN conduit for FTTP. Ensure the cable remains hidden within the walls and avoids any external visibility; no wiring pipes or conduits run outside of the wall. Install either a fiber optic cable or ethernet cable into the conduit, or alternatively, a pull cord. Route the cable from the PCD at the garage to the roof cavity: Continue the cable from the roof cavity down to the desired hub location inside the house: Note; Utilise the existing hub wall plate located directly behind a "waste stack column" for cable runs. This column provides a direct connection point to the roof cavity. Install 2 wall plates for ceiling audio speakers (12) and 7.1 home theater (7). There are already cables hanging loose at the locations where the wall plates need to be installed. You don't need to run any new cables, just connect the existing ones to the plates. This involves soldering the audio cable ends to the appropriate terminals on the wall plates. I have the wall plates and connector terminals already purchased.

I got 2 TVs at home. One downstairs and one upstairs. Upstairs TV antennae works but picture is not that clear whereas downstairs TV does not work at all even though it is plugged in to TV antennae socket. I recently moved in. Secondly there are few electrical sockets that need repair/replacement. - Due date: Needs to be done on Thursday, 11 January 2024

Installation only Please check pictures for guidance Only licensed electricians required All accessories are available Illustrative photo of house brick provided 3x chandeliers @ kitchen benchtop, dining table (image provided) and staircase Note: batten holder provisioned for all pendant/chandelier lights 2x wireless security cameras (eufy) 1x wireless camera door bell (Ring) 2x wired flood lights with sensor (yet to purchase) 1x wired flood light camera (eufy) Person getting the task will also have the opportunity to extend works for 5x power points after satisfactory completion of this task. - Due date: Before Monday, 11 March 2024

Electrician needed to do the following the: 1. Replace a heated light in bathroom 2. Change the entrance flood light 3. Fix or change the two wall lights in the front of the house Lights to be picked up from Bunnings once assigned and discussed. I am not sure why lights are not working so I am assuming the electrician will come check and fix accordingly with the quoted price. Thank you - Due date: Before Friday, 19 January 2024

Seeking an electrician to replace approx 12 standard light switches and a powerpoint throughout the house. Just your typical light switches purchased from John R Turk, nothing fancy. Must be a licensed electrician. Thanks - Due date: Needs to be done on Saturday, 23 December 2023