Find a local floorboard profesional in NSW

full small house carpet removal - original timber floorboards underneath will require sanding

A small section of floorboards lifted up to allow power to be installed under the boards. This job needs to be done Tuesday or Wednesday 14-15 May. Following, that reinstallation within one week. Looking for someone with experience working with floorboards (herringbone style). Quote is for labour to remove floorboards, and replace afterwards. Materials (floorboards) to be supplied if required due to damage, and to be reinstalled soon afterwards.

Level floors and lay floorboard for 1 bedroom apartment

3 bedroom single story house skirting board installation. Using 66mm splay skirting.

I need to replace hard timber floor with tiles in approximately 1sqm area to match with rest of the floor.

Skirting board needs to be installed and touched up

Wax and polish wood floorboards main living space and corridor

Hello, I have a small unit and that’s carpeted. I’d like to install floating floorboards. I could buy the product from Bunnings and need someone to install. Area is hallway, kitchen, living room. Don’t need in bedrooms, laundry and bathroom I have no idea of costs so please make an offer. Thanks 🙏🏼

15 square meters of composite decking boards to be laid easy work and short day. After help me give the site a quick clean up.

Just needing someone to lay approx 25m2 of floating hybrid floorboards on a concrete floor. I have the underlay and boards ready to go.

I am seeking quotes from an experienced carpenter to stop floorboards creaking in the second bedroom of my apartment. We have floating bamboo floorboards on top of old, structural floorboards - and one particular patch emits a loud creak, no matter whether a rug is placed on top of it or not. Video of the creaking can be provided. The room is on our second level. We would please like an explanation of what work would be performed.

Need to install skirting board around 30 meters

We started laying the timber boards and finding it hard cutting around doors and corners etc. Need someone with the gear to finish it off and then install a quad along the edge, caulk gaps around doors and install a c-channel trim termination points such as doors. Will supply all materials. Will need your own tools. Found it hard with a jigsaw and dropsaw. Approx less than 20m2. First photo is the area left to do, second is where we got to and the 3rd shows where the boards need to be pushed back together where they came apart.

I need old ripped up carpet, underlay and carpet boards with nails in them removed. They have been ripped up off the floor and are sitting in a pile.

install floating floorboards (we supply) for 25m2

20 sq meters of hardwood flooring to be cut and lifted glued to concrete. I’ve taken a section out that wasn’t too bad to lift just time poor now and need it done next few days

I removed laminate flooring from hardwood floorboards and there is remaining adhesive that needs to be removed with Turpentine. My husband has complete the first clean with turpentine and removed most of the thick adhesive, however it needs another clean to remove the final tackiness on the floor. Kitchen area is 12m2 (4m x 3m) - turpentine and rags provided. You will need to bring your own face mask, gloves and knee pads. The first 3 pictures (where laminate flooring pieces are scattered on floor) show the flooring BEFORE the first clean. The last 2 pictures show the flooring currently so you can see the difference and just final clean needed. Rest of the house is ok, only kitchen area. Expected time to complete 3-4hrs.

Wanting floor boards sanded and polished. Approximately 32sqm. Kitchen and dining room

Trying to replace six broken skirting boards due to puppy chewing, price negotiable. (Paint needed too thanks) - Due date: Flexible

Hey. I have bought the skirting boards for my house, and a few tubes of liquid nails. I now need someone to install them in my living room.