Find experienced local carpenters in Carrara

needs to know assembly cost to satisfy budget restraint before ordering flat pack garden shed. assemble /erect flat pack garden shed 182cm height 194 cm wide 147 cm deep [measurements are aproximate

Decorative square wooden inlay surface gotten wet and has curled and lifted

I need someone to build a shed from Bunnings for me at a sports club in Carrara

Water damaged kitchen as tenants overflowed the sink, kitchen gables and bench that sits on bench top all swollen, looking to fix for sale of house Kitchen is white 2pac and understand issues that this will cause

we have an elevated paved area that we want to build a 3m x 2.25m new easy Shed on. There is a flat area just a few meters away to put it together. - Due date: Flexible

I have a cafe in carrara, I need to get my coffee bench fixed - Due date: Flexible

Hoping to fill the space above our kitchen cabinets and fridge Looking for quotes for someone to build and install bulkhead. Nothing Fancy and doesn’t need to be painted. Flexible with days times etc Carrara, Gold coast QLD - Due date: Flexible

Assemble ezislider garden shed - Due date: Flexible

Just moved into a new townhouse and from the top of the stairs there's a straight drop down to the ground floor. I don't trust my cats to not jump/fall off the ledge and break their legs. One of them has already had a knee surgery so don't want to risk it. I'm not sure what's the best way to do it, so open to ideas. I was thinking of some sort of timber railing extension using slats. Would probably need to add another 90 cm. - Due date: Flexible

Have New shape Ranger and need new aftermarket Flare kit installed - Due date: Flexible

Build a kitchen base and install cabinets (already assembled) and fit a stone bench (already cut to size as per pictures) but you may need to cut a small section out of the window architrave to allow the stone to sit flush with the wall. Our timeline has moved forward due to the flooring being installed next Thursday so we need the base in before that at least. I can assist with labour if you are 1-person. Cabinetry and stone bench is currently in storage (Bundall). Suit a cabinet maker or very good handyman. $5 noted is only for a quote (physical showing) - Due date: Before Wednesday, 25 October 2023 - Due date: Before Wednesday, 25 October 2023

We need to make concrete base that we can put on shed in garden. 3m x 1m shed. It will be basic shed from Bunnings. We have corner next to cubby house where it will go. It is just not flat, one side is on small hill and we will need also to remove dirt from there to make it flat and then do the concrete base - Due date: Needs to be done on Monday, 2 October 2023

I need my existing carport roof raised around 300mm to accomodate new caravan. Currently has 4 x metal posts - Due date: Flexible

The deck is 5 m long x 1.8 m at it’s widest and 1.3m at it’s narrowest. I want it glued and screwed as necessary. I have the glue and screws. - Due date: Flexible

Back deck needs to be sanded back and re-stained. Approx 6m x 12m Budget flexible as not sure what Thai would cost! - Due date: Flexible

Garden shed 4x2.5 Require someone To build flat pack shed on concrete patch - Due date: Flexible

I have 2 side by side dishwasher draws that need removing. I need one replaced with a full sized dishwasher and then I need either 2 draws or a cupboard built to replace the other. - Due date: Flexible

We would like to have in our terrace corner build up bbq area where we can put on one side our bbq top nd then on other side of corner have a little bench to sit down or put in some Christmas decoration later on ...We need that the corner is used and nice. It was trea in there before and still is the little hach which needs to go to Please let us know if you could help us to do it nice...please just experienced person . Thank you - Due date: Flexible

We are looking for a handyman who will: (i) Assemble a cupboard 400mm (Depth) x 400mm (Width) x 1800 mm (Height), and move the final assembled cupboard to the space between the vanity and bathtub. (ii) Take the unassembled flat packs of the cupboard upstairs to our first floor bathroom to assemble. The final assembled cupboard is shown in first photo. (iii) Attach (with adhesive) a 'Metal Mate' 50mm (Width) x 3mm (Thickness) x about 900mm (Height) Aluminium Flat Bar to the wall left of the vanity, from underneath the vanity top to the bathroom floor, so as to cover the brown-coloured "inverted L-shaped" section on the wall (as shown in 2nd photo). Due date: Flexible

We have a new cooktop that needs installing but it’s bigger than our old one so we need the bench cut to fit it. - Due date: Before Friday, 19 May 2023