Find experienced local carpenters in Biggera Waters

Needing someone to install doors to bedrooms and cupboards. this would include cutting out door handle holes and hinges. 3 x 820 doors 2 x 720 doors 2 x 520 doors (doors may need to be shaved to 517) 2 x 420 doors Pick up of doors should be quoted as a separate item If you have trade discount that you can pass on I would be happy to be quote the door price as a separate item as well. Looking at Bunnings doors - Style HAG 12. Some may be a special order Budget listed is for the instal only.

assemble 3mx2.25m garden shed(brand: easy shed) on the concrete slab, assemble is half way, I need a handyman who has easy shed assemble experience to complete the assemble job, as soon as possible

Have purchased some materials ,will need springer replaced on deck steps

Clean up oil stains on carpark space

Build custom walk in wardrobe - Due date: Flexible

5m*6m deck need to be constructed on concrete slab - Due date: Flexible

Want to build a pargola in the back yard 5meter * 6.5 meters with blinds - Due date: Flexible

Part of a bulkhead wall of a retail store was removed to do some repair work. Need to be replaced. 2 boards on the bulkhead wall, they will also require a wood frame. Size is approx 3m long and 50cm wide. I have the exact measurements - Due date: Flexible

Hello, We would like a doggy door cut out for this area of the house with some skirting around it that we can paint white. Looking for an experienced carpenter to complete the work. Welcome to come scope out the job before hand. - Due date: Flexible

Need a plasterboard repair + 700 mm skirting board installed to a lightweight steel stud wall. The fridge did not fit, so I had to cut the plasterboard in the wall and edge and skirting to fit. Need someone to come and install approximate 1800x700 mm plasterboard and join Edge with External Angle Plaster Trim. And add an approximate 700 mm skirting board with a 65mm square profile.. There is no need to paint, just install, joint, sand, etc. $$ available Located in Biggera Waters Waterpoint Recidences.

I have 7 pieces of timber I need cut to 65cm long each. I then have a thin timber panel I need cut into 7 pieces that are 23cm by 19 cm long. I then need the 65cm timber pieces erected on the panel cut outs. Please help - Due date: Needs to be done on Sunday, 27 August 2023

Install kick boards. I will supply from Bunnings. There is one corner that’s higher than the kick boards so may need timber to fill the gap on top. - Due date: Flexible

I have a PC that need to be built properly - Due date: Needs to be done on Monday, 17 July 2023

2 Vj panels cut and installed on two walls 1220 h x 2.2 L Timber top cut to size afterwards and placed on top of vanity. I’m finishing the prep work today.

Sanding back verandah deck, ready for new stain - Due date: Flexible

The cupboard used to have sliding doors. They have gone - Due date: Flexible

Replace timber top pieces - Due date: Before Saturday, 26 November 2022

I have integrated fridge cabinets with 95 degree blum hinges to the doors. I need someone to balance these level and attach the integrated fridge brackets to the inside of the door. It is for three tall cabinets. Each have 3 panels. Fridges are in two cabinets and the third is a pantry. - Due date: Needs to be done on Friday, 28 October 2022

I have a kitchen that needs a few changes I need the boxes & shelves made - I have all the products (no tools) just need the job done. And a bench top that needs a few cuts ( it’s not stone) you can put in too. I have all the products for that again but no tools. Probably half a day work at most - Due date: Before Friday, 17 June 2022

I need to get someone to fit new unions for my multiport valve to the existing piping. Will need to cut off existing unions and reattach new ones . The current ones are glued on not screwed