Find experienced local carpenters in Fortitude Valley

Remove kitchen benchtop stain

We have a pre-existing space where old dishwasher was. We need space heightened by 45.5cms. See attached photos of space. Our new appliance is a Fisher and Paykel dishdrawer but slightly taller than old one. ASAP job required. Old dishwasher: Height: 410mm - Width: 599mm - Depth: 573mm New dishwasher: Height: 454 mm - Width: 599 mm - Depth: 573 mm

Installation of 150mm feathered edge skirting with contact adhesive. Skirting and adhesive supplied. Room is 4900mmx4075mm. No need for cutting internal or external corners as skirting will sit flush when bent. There are 2 doors so skirting will need to be cut. Preferably this afternoon if possible.

Sand and smooth corners of Teak bench top . Paint the metal Frame of the bench seat Do not paint Teak bench top. Put the bench seat together/assemble

I need a kitchen drawer shortened in the back.

I have an old mirror to be taken down (presumably attached to tiles via liquid nails). mirror can be broken if required then, a new cabinet to be picked up from Newstead Bunnings, and installed to wall. wall to be attached to is tiles on gyprock. the lights and power point have been removed already

See photos. This “wall” has been installed and as you can see it is awful. It needs to be installed properly. This wall is just for privacy reasons it is not structural, our tenant simply needs to be able to shut a door. Not sure of the ballpark cost for this, please offer. - Due date: Before Friday, 12 January 2024

I will need cafe table top. Need to have quote

Have a kitchen bench requiring installation 2450 L, 800 H and 600 D. Bench requiring fixing to the ground (tiled flooring). Bench will have sink and dishwasher included. Will need plumbing and electrical so not sure how we get this organised.

1. I have two tall pax wardrobes to be installed into two bedrooms, each 1500mm wide, plus a Billy bookcase with doors into the dining area. They all need to be built in so the skirting & picture rail need to be removed to allow them to sit flush to the wall. 2. I have an 15 year old ikea kitchen I’d like to fit 3 new doors + 4 drawer fronts + 2 cover panels (enkoping style) 3. Fit 2x new door fronts to a bathroom vanity (enjoying style) Note - the kitchen & bathroom doors will likely require new holes to be cut into the doors as ikea changed the system so they won’t just click into place.

Carpenter/Handyman required to assist a team with a showroom fitout. Building of walls, installing of fixturing/shelving onto walls. Miscellaneous other build requirements. rate offered/advertised is per hour. Own tools required

Assembly of an Easy Shed bike shed in our parking spot in the garage. Tools will be required and it recommends 2 people please see photo. Does not need to be attached to the ground. Needs to get done as soon as possible. - Due date: Flexible

See photos. We need a form of partition/wall installed here, with a door. There are wooden doors onsite, we can use one of those. Other materials you will need to supply. We are looking for a simple, cost efficient solution. Nothing too fancy, permanence is not an issue either as we will knock down these offices later in the year. Please provide a quote- happy to adjust this as needed to supply materials. THIS DOES NOT NEED TO BE A PLASTERBOARD WALL - ANY FORM OF PARTITION THAT A DOOR CAN BE ATTACHED TO IS FINE - Due date: Before Friday, 12 January 2024

There are three timber box seats that have deteriorated and can no longer be used. I need them removed. They are free standing (ie. not attached to the wall or floor). They are each approx. 2m x 50cm x 50cm. They are in the courtyard of an office tenancy in Fortitude Valley. - Due date: Before Friday, 5 January 2024

We need to build a timber stud wall with plaster on one side only and to have a set of double doors from a retail space into a store room. price is negotiable and based on a quotation. The amount on the airtasker page is not reflecting a price. - Due date: Before Saturday, 27 January 2024

There is an attached desk at the unit. It has a wooden look laminate that is chipped, the realestate requested it to be fixed. We need to find a colour matching laminate and replace the stripe. Dimensions are 100cm x 5cm A very small job, just need a matching colour of laminate for the desk - Due date: Needs to be done on Wednesday, 29 November 2023

Build a 3m x 2.25m Gable Slider Shed - Due date: Flexible

Remove a bathroom mirror from wall, possibly attached by double sided tape or glue. The hang/install new 3 door mirror cabinet. - Due date: Flexible

Looking for a quote for custom vanity of 1500mm width with left side on top basin - Due date: Flexible

Looking for a cabinet maker to quote to build and install floating shelves as pictured from plans . - Due date: Flexible