Find experienced local carpenters in Parkdale

Spotted Gum dining table 260x98 Black dye (plate size) stain. Probably whole table will need to be sanded back and re oiled etc. Pref carpenter to take job as you will need tools & stain/oil to to the job. Task was listed previously

Hi, We need to install two metal glass doors in our downstairs and upstairs hallways. The doors will be purchased by us before the job commencement. The doors are 2340mm x 820mm and come with metal door jambs. The downstairs hallway opening is approx 2660mm x 1220mm, the one upstairs is approx 2700mm x 1000mm. In summary, we need someone to build us 2 x door frames fully plastered (painting is not required) and install the two metal doors.

Cut a solid (merbau) timber table top (33mm thick) to the following dimension 1450mm (L) x 750mm (D). On site job with the timber in the garage ready to go - happy to give a hand. Current dimension are 1800mm (L) x 900mm (D) x 33mm (H). **Right finish (saw blade) required, no chipping**

I’ve got a small absco Bunnings shed that needs to be erected. - Due date: Needs to be done on Friday, 26 January 2024

Our side gate is wooden and it has recently started jamming. We need some wood planed off the long edge so it closes without jamming. - Due date: Flexible

Assembly of bike shed with the following dimensions: - 226mm wide - 131mm high - 780mm deep Need to supply your own tools etc. Power is available if required. - Due date: Flexible

House constructed in 1940, the linen cupboard is one of the only non-renovated areas in the house. Looking to remove existing one and replace with a new linen/laundry cupboard. Material to be in timber painted white. We require 4 shelves, and panels (top,bottom and sides). The door does not need to be replaced only the inside. Photos attached (2 of the current cupboard and 1 to give you an idea of what we would like) Approximate measurements 215cm height 73cm length 30cm width - Due date: Flexible

I'm looking for a plasterer with experience installing plaster ornate to install some sections following a renovation. See pics attached. MUST have experience with this type of cornice so please specify in your offer. - Due date: Flexible

We have a small treatment clinic & are looking to upgrade an unused room into a treatment room. We require 1 x custom cabinet with lockable draws/ cupboards & fridge void. Total aprox 2400mm in length 700mm deep. - Due date: Before Friday, 26 January 2024

Hi the top of our coffee table has been damaged from constant wiping. We would like to repair the top and place a thick wipe resistant lacquer on it so it can better handle being a wipeable surface. Please see photos and send us your quote. - Due date: Before Friday, 8 December 2023

Looking for someone to install some skirting boards and arkitrave - Due date: Flexible

Sand back and re finish table top. Has had protective layer stripped in certain areas, so scratches and stains. - Due date: Flexible

Easy Shed Assembly and fix to concrete slab (fixings provided) 1.5m x 2.25m Skillion Roof Shed. - Due date: Before Saturday, 21 October 2023

Qualified Carpenter or alike needed please.. Are you neat /tidy and have an eye for detail? Task must beFriday 20th of October (this Friday). Trim / shave bottom of x2 internal doors and re hang both doors. Please only apply if you can do Thurd night or this Friday from 10am onwards. Pics below show both doors on left and right of passage that will be removed ready to be shortened from bottom and rehanged after this. New flooring going in tomorrow and Thursday. Doors have recently been painted and in v good condition. - Due date: Needs to be done on Friday, 6 October 2023

Would like to get some quotes for a new kitchen island bench. We have a drawing of what we would like (attached, can provide PDF too) and are looking for an idea of cost to supply and install. Task Budget is not indicative of what we expect to pay (obviously, $5 will not cover a kitchen! - just not sure what price to put, hence just looking for quotes at the minute) - Due date: Flexible

Building high end homes around $10-$30 Million projects, very luxury and fine carpentry work, all stages of frame, lock up & fix

We have a wooden outdoor corner seat that we need to fix so looking for someone that knows how and has experience doing it. Happy to pay for material and labour seperate so the post is for labour only. - Due date: Flexible

Require new timber ladder made on kids slide set. Existing timber rotten. Approx 1.5m high as per images. - Due date: Before Friday, 10 March 2023

Require new timber base that attaches to exisiting kids slide. To supply and install. Approx 1.5m length. Then attach existing small ladder as per images. Yellow highlights where the timber would be. Thank you. - Due date: before 5th MARCH

Build 2 x bench seat frames 1.8 x 45 x 45 and 1.2 x 45 x 45 I have Merbau panels which need To be cut to size and attached to frame. - Due date: Before Saturday, 4 March 2023