Find experienced local carpenters in Parramatta

Please see attached pictures of completed cupboard with planks. The other one has just one Plank built, I would like to have 6 more planks to be installed, I have necessary planks, they just need to be cut to below dimensions (in mm) & drill into the wall. I will have markings on the walls where they need to be installed. Need to bring circular saw/equivalent tool to cut to size & driller kit to drill into the wall, Max 2 hours job as some planks are already cut to size. Resting Plank (885 × 595 × 16) Supporting Planks 1 & 2 that go on the side (600 × 70 × 16) Supporting Plank 3 that goes at the rear (885 × 70 × 16)

My kitchen benchtop has a burn mark. Need it repaired

Stainless steel folded sheet metal needs to be welded cleaned and repaired. 4x edges to be welded 50mm lengths- total 5 units

Need absco shed bulit. New shed in box onsite 3m wide x 1.52 depth x 2.08 high. Will need assembly tools, drill, pop rivet gun etc.

Renovate pantry space with new bench top, tap, cupboards. Suggest us with new design

Garden shed install ggggggg

Need a professional stratco shed installer Picture attached of the garden shed Needs to have experience Wentworthville

Build and install floor to ceiling shelf unit with dimensions 300mm deep, 500mm wide shelves. 220mm apart. Shelves to appear floating like Ikea LACK shelving unit (https://www.ikea.com/ie/en/p/lack-wall-shelf-unit-black-brown-80430591/). I have no idea of what this would cost. Number in budget is just made up but I'd want this to be quality rather than cheap an nasty.

Need my back deck sanded to raw timber, all horizontal and vertical surface including the stairs of 5/6 steps only each side. Will be getting it restained after Flick me your offers, ideally with proven reviews and experience please

Taken down old pendant lights and replace with stain glass pendants. One in kitchen area. One in hall way. Ladder required. Home during most days.

Made-to-measure shelves (three) for a broom cupboard

New laminate with join to be installed, I have ordered new benchtop, i require install and cut out for sink only, please see photos

The benchtop cutouts need to be cut by 3-5 cms just from 1 side (front). See the red line - only that side bench needs the cut. Have to remove the small wooden plank connected at bottom.

I need someone to assemble a shed

Carpenter to fix a broken door and move a support post for deck about 200mm

Drill and put together remainder of bin shed. Assembly is 80% completed as panels already put together. All nails and screws in image provided. Once completed, happy to be placed over cardboard box as shown on image. Need your own tools

Build started shed on existing concrete. Use your own tools.

I need someone to build an eazy shed storage shed as I don’t have the time to do it myself, looking to get it done today

[Tasks] 1. Remove 5 x rotten wooden planks from pool deck. Refer to example photos 2. Supply and install new wooden planks x 5. Estimated size 2 meters x 8cm side 3. Dispose the 5 old wooden planks [Other Information] a. You will need to provide all tools and material required for the task b. Before or during making an offer process, ensure you upload photos of similar tasks you have performed so I can see examples of the quality of similar work you had performed. Thank you. [Important dates] Task can must finish by 26 February 2024

Installation of Bunnings Kaboodle laminate Benchtop / Acrylic Splashback / Sink / Oven and Dishwasher. Already have wall/base cabinets installed. Also already have electricians and plumbers who will assist.