Find a professional gate installation in Coomera

Attach pedestrian gate to existing brick entrance

We need a gate with the following specs Dimensions of opening: 1190mm wide x 1900mm high ( gate may be smaller) Design: Horizontal slats Slats: 1 inch thickness, 1 inch spacing between slats Lock: Lockwood Type 4 Color: Surfmist Orientation: Opens outward towards street

Needing these few broken slats replaced on gate. As shown in picture, not a fancy gate, even open to second hand wood to be used.

Removal of fence to allow builder access to build garage. Relocation of gate for security of neighbouring dog.

gate not closing correct very hard to open and close needs to be fixed - Due date: Flexible

Remove current aluminum slate door and install new ones - Due date: Flexible

Three gates in total need to be assembled and installed. Two double gates need to be fitted. One side swung off the side of the house, wall plate needs to be fitted. Other gate needs to be swung off a 4x4 post that will need to be attached to the current retaining wall. As gates are a pre-made size but unassembled they will need to be trimmed to size before assembling and fitting. Gates are colourbond steel and will need to be cut with metal cutting equipment. Gates have drop pins in middle so holes will need to be drilled in cement. 2nd smaller gate, also colourbond will need to be trimmed to size before assembling and fitting. Gate will need to be swung off original post as there is a wooden gate currently fitted. - Due date: Needs to be done on Monday, 30 October 2023

I need help to replace the roof sheets on my patio, the existing one is made of steel. I would like to replace them with tinted polycarbonate ones to get more sunlight. I can source the sheets myself, just need an indication on labour costs so I could work out the budget. The roof size measures around 15m x 4.8m Ideally you will help replace all the sheets and take the old ones to the tip. Given budget this can be done on asap basis. Upper Coomera 4209 - Due date: Flexible

The gate has been pulled out of the wall, I need a new latch, the blind cord is broken and needs to be replaced and the smart door handle needs to be fixed - Due date: Flexible

Fix wooden side gate, currently scraping wall. Solid gate and fence posting so don’t wish to replace, think just needs new hinges and re-set - Due date: Needs to be done on Sunday, 8 January 2023

We have a fence that is 4.6 m wide. We are wanting a double gate installed for side access. Happy to supply all material needed - Due date: Flexible

Currently have a 5.4m (rough estimate from proper plans of house) wooden slatted fence that is starting to rot. I need to replaced with something a bit nicer. Happy with same thing but better quality this time or even PVC or different material. It must look good as we will be listing the property for sale. - Due date: Flexible

I have 2 side gates that have metal pin hinges that have rusted off. Require welding of supplied hinges to metal frame and attachment to timber gate post.

My mother in laws dogs scratched and ate the fence paillings off my gate. I need the panels replaced tomorrow please. I have attached photos

2800x3200 slab required, depth starting from approx 4 inches and can be slightly ramped if required. Pricing required please. Area has already been dug up.

Looking to extend driveway/pathway on side of house

Front Gate - The post on the right side is coming out of the wall needs to be reset into the wall. The wall is rendered by by Hebal, please be noted that the fixing material should be special for Hebal.

I need: - 1 x side gate supply and install - 1 x side gate latch fixed

I have a fully functional gate turned into a motorised gate. Would like someone to install a motor on the gate. NAME YOUR PRICE

Installation of gate, materials and concrete supplied. Need done ASAP.