Find a professional gate installation in Melbourne

Hi , i need a welder to weld an auto gate arm. Many Thanks Chris

We have a heavy old steel gate which needs to come off and the uprights and footings need to be carefully removed. This may involve cutting around some concrete and needs to be done without damaging adjoining footpath. Lock needs to be removed from gate for reuse.

o Timber on bottom of intersecting gate. Remove. See photo 1 o Middle horizontal rail on back of gate. affix a chamfer (minimum 60 degree angle) to the top surface to prevent climbing. See photo 2

Fix self closing latch on pool gate.

Remove old broken screw and re attach flat bar part of a D gate latch into wooden gate

Renault capture 2016. The handle at the boot door is totally broken and only attached by the rear camera wire, was hanging off car vertically yesterday. need it reattached or replaced.

I will supply the mechanical parts I need some one to assemble it

Paling fence needed to secure property from rear laneway. Requires: A small retaining wall at the base, a gate in the middle, and some lattice at the top. Roughly 3m total height and 4m length. Gate to be up to 1m wide opening outwards. Two steps as part of the basic retaining wall. Retaining wall to be basic sleepers. Welcoming a phone call to confirm details.

Gate lock has broken and come off due to water damage - need repaired and to reattach lock and realign bottom lock

Hi, I need a handy person to install a baby gate in a hallway so a drill is required for this task, to put together a flat pack bed it is Queen size simple style without the storage underneath and to put together a flat pack outdoor set please.

Need person with a sander to sand back and then oil the deck, wall and gate shown in images. No rush. I would like the job done on 21 or 22 April, provided it is a dry sunny day🌞. I will provide the oil. You need all other equipment.

Build Koala Getaway Sofa and Kiribilli Compact TV unit (links to items below). Ideally after 2pm today. https://koala.com/en-au/living-room/sofas-couches/getaway-sofa https://koala.com/en-au/living-room/bookshelves-consoles/kirribilli-tv-unit?color=warm-ash

Re hang a gate on existing post. The gate hinge which is attached to a metal frame is seized and needs to be freed before hanging.

Hello. We have a security trestle gate at a shop in Fitzroy north that is getting more and more difficult to open. After some one who is experienced at servicing them to quote for any repairs if it’s worth repairing.

My small front gate no longer closes as the post it sits on has moved over time. I need this fixed with one important condition - you cannot damage the creeping fig growing on the post because this creeper covers the adjoining fence and it must be protected.

I have a wire play pen for my dog but the gate is a little too high for her to walk in and out. Looking for someone to cut out a bigger opening so she can get in and out without jumping.

62 North Street, Richmond VIC Fixed to gate aspl today - Due date: Needs to be done on Thursday, 3 August 2023

Electric driveway gates. One gate has dropped and is leaving gap, refer photos. Might need to be re-hung. Quotes welcome!

Rear gate needs to be rebolted into back wall/ fence to secure

Our sliding gate is not opening and we are looking for an electrician or someone with the skills to fix it for us. The back sliding gate opens with a keybut is currently just making a clicking noise and not opening when we press the button