Find an experienced handyman in Richmond

Replace two kitchen cupboard hinges (I have replacements); I couldn’t unscrew them with a screwdriver so you might need a drill. Replace shower head (I have a new one). You might need a wrench. Pics attached, it’s a single head, like for like swap. Drill two screws into plasterboard wall, to hang a 9kg mirror (IKEA Stockholm style).

Water from a plant seeped into the wooden floor board. Needs it sanded back and touched up. It’s about 30cm in diameter, or if cooked then replace the panel/s

I need someone with a tall ladder, to reach the lights to remove them. Ladder needs to reach 5m high ideally. Would also need basic tools, either screwdriver or power drill and Stanley knife to cut cable ties. Whole task shouldn’t take long, 30mins max.

Hello, I need a picture and a mirror hung. They are both large. You'll need a drill, hooks, wire and ladder. The picture has wire already. The mirror is a bit trickier. Images attached. Cheers, Bree

Need acoustic door seals around perimeter of front timber door to eliminate sound

I have 4 drawer facades that have stripped screws in them I can’t remove. I’m on a mission to change the drawer handles but whoever installed these originally has used cheap screws and stripped most of them when installing. I need some assistance to remove the screws from the drawers.

12 x A3 framed posters need to be hung in 3x4 rows, equally spaced between each other on one wall. The pictures have been professionally framed in wooden frames with glass panels and have hanging string on the back. Must be done Tuesday afternoon please :)

We need someone to help mount our tv (48inch) and a large mirror (45 inch). We already have the mount for the tv and the mirror.

I have two large canvas that I need hung over my stairs. It is quite high! You will need to bring a ladder

READ FULL DESCRIPTION Looking for someone who can hang art work (x9) and mirrors (x2) one of the art pieces is 134cm by 100cm and weighs roughly 30kg others are as small as 25cm x 25cm. I can assist with any heavy item lifting and holding. Some items may have to be mounted at 2mts height and on walls over stairs. I’m looking for a professional who is mindful of their work and impact on the space, that is careful of other furniture pieces whilst working, flooring and carpeting (I’ve had bad experiences) be has a good attitude.

The dishwasher requires some maintenance, where it starts and then stops after a 5 minutes with a fair bit of water gathered at the bottom. It is a fisher and paykel dishwasher.

Hello, I have a framed graduation gown and hat that I would like to hang up in our garage The frame is 30kg and has big hooks on the back Need it hung high and secure

Need these 3 paintings taken from Richmond to Abbotsford today before 2pm. About 1.5x1.5m

I had an electrician make a channel in my brick wall. I need it filled so that I can then paint over it.

Very rusted hollow metal frame needed to be taken down before lease move out.

I got a new dishwasher installed, and due to a miscommunication the old one was not taken away by the installers, and is now chilling on my deck. I'm looking for someone to take it away. It's still fully functional, so your final destination doesn't need to be the tip, but that's up to you.

We have three paintings that need hanging on plasterboard walls. 1. 160cm wide x 190cm high (not heavy, just large - canvas mounted inside timber frame with no glass.) 2. 43cm x 54 cm (framed in glass) 3. 43 x 54 cm (framed in glass) Image of larger canvas and the wall it needs to be mounted on, attached.

I have 2 x Sanctuary 360-degree Rotating 4 Tier and 3 Tier Display Shelf Bookcase Organisers to be put together. You will need to have an understanding of how to put these together.

Hi. I need someone with basic carpentry skills to assist with fixing two cupboard doors in my home: one in the kitchen and one in the bathroom. I can put the cupboard doors back on but after a few weeks/months they come off again. The hinges seem fine: not damaged or deteriorating. I have tried tightening the hinge screws, adjusting and repositioning them. I suspect the problem is that the drilled holes for them in the cupboard walls have come loose / stripped and are deteriorating. They may need some wood filler that can be drilled into. Then again, the screws just might simply need to be adjusted and tightened properly (I am just using a screwdriver set). If needed, there is a Richmond Mitre 10 Trade Centre at the end of my street, and Bunnings Hawthorn is a six-minute drive away. I would expect the person to have proper tools. I will purchase any materials needed.

Front door is sticking to bottom concrete step and not closing properly. Will need to be shaved and/or rehung.