A close up image of a carpenter sandoing a plank of wood
A close up image of a carpenter sandoing a plank of wood

Find experienced local carpenters in Sutherland Shire

Fill a short form and get free quotes from local carpenters in minutes

4.3

Excellent rating - 4.3/5 (10900+ reviews)

A range of carpentry for all your needs

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews in Sutherland Shire

Excellent - good problem solver

Draw runners kitchen cupboards need replacing

$250

Great Work, on time & very professional

Carpentry-Cuboards cut down

$100

Highly recommend Robert @ Tradies on Task. Prompt, clean and efficient with his time. If only all tradies were as reliable and honest. Would have Robert come back again.

Cut concrete

$150

Reliable, punctual and very professional. Installed our laundry cabinets with great workmanship and attention to detail.

Install Kaboodle cabinets in my Laundry room

$600

One of the 2 most humble people i have ever meet and worked there butts offs. They were polite and genuine people. They worked hard and precisely. Would highly recommend Steve and Erika for any job as they will put all there heart and soul into any project.

Install a shed

$50

Great job and on time

Wall shelving in garage

$300

What's the average cost of a carpenter in Sutherland Shire

$200 - $555

low

$200

median

$333

high

$555

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Sutherland Shire

based on 236 reviews

4.96

230
4
1
0
1

Best rated joiners near me

Recent Joiner reviews in Sutherland Shire

Amazing work with so much knowledge to offer.

Carpenter/ Joiner required for built in oven and cooktop

$200

These guys are great expect honesty reliability and definitely know what they’re doing. They work fast and try their hardest to make sure your job is done well

Take down a few walls and dismantle joinery Cronulla

$400

What's the average cost of a joiner in Sutherland Shire

$180 - $350

low

$180

median

$200

high

$350

Low, median and high bar chart distribuiton

Average reviews for Joiner Services in Sutherland Shire

based on 3 reviews

5

3
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

289+

Tasks successfully completed

2

Average amount of offers per task

43

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 26th Oct 2020.

What do carpenters do?

Whether you’re planning a major renovation on your home or you simply want to make things look a bit nicer, hiring a carpenter or chippy can help you with many different tasks. Carpenters use different types of power tools and hand tools to carry on building and construction work. 

Carpentry work is generally broken down into two types: rough and finish. Rough carpentry refers to work that doesn’t have an intricate look, as it’s covered up – often by bricks, tiles, or plaster work. Finish carpentry covers the work that will be on display, so needs to have a nicer finish. Furniture, decking, and window frames all fall into this second category. 

Decking

Many Australian homes are blessed with a large backyard and plenty of sunny hours to enjoy that space. A decking specialist can add an outdoor deck or upgrade an existing one that opens up your outdoor space. This is great if you want to entertain guests or eat outside as a family during the sunny months. 

Cabinet making

Cabinet makers are one example of finish carpentry, because of the high level of detail that goes into their end products. Unlike structural work, it’s important that a cabinet looks nice, so this type of carpenter is a lot more focused on fine details. Cabinet makers often specialise in other forms of furniture making too. 

Refinishing carpentry

While structural carpentry is concerned with jobs on the large end of the scale, trim or refinishing carpentry looks at the small end. A trim carpenter is the way to go if you want someone to fix up your skirting boards, cornicing, or a similar aspect of your home.

Custom made furniture

A house isn’t a home without a few personal touches, and if you’d rather avoid the cookie-cutter Ikea approach to decorating your property, hiring a carpenter to create custom-made furniture can make you stand out. Whether you want chairs, tables, or a shoe rack, there’s someone nearby who can help. 

Joinery

Joinery services encompass the craftsmanship of creating and joining wood in workshops, distinct from on-site carpentry. These services range from bespoke projects to crafting timber buildings, emphasizing precision and passion. Joiners play a crucial role in interior woodwork, window and door production, and specialized construction, offering tailored and quality timber solutions.

Recent Carpentry tasks in Sutherland Shire

Install a garden shed in the backyard

$300

Miranda NSW 2228, Australia

27th Oct 2024

1. Lay the foundation 2. Install the shed

Strip, sand, paint & stain staircase

$500

Greenhills Beach NSW, Australia

27th Oct 2024

See pictures. We want to transform our dark staircase to look like the white & light stained one.

Cut down built in wardrobe sliding mirror doors

$300

Heathcote NSW, Australia

26th Oct 2024

We recently moved our built in wardrobe and were looking to see if we would be able to trim down the two existing mirror doors and frame and make them fit the new dimensions as we have had trades tell us this can be done but havent been able to find anyone with experience in it. The doors are currently 121cm wide each and would need to fit together a 170cm space. If you think this is something you could do please reach out. I have uploaded a generic photo of what the doors look like as they're currently off the wardrobe due to sizing issues.

Add recessed inset stairs to existing deck

$5,000

Caringbah South NSW, Australia

23rd Oct 2024

We need to add stairs to a pre-existing deck as the stairs were removed for the installation of a pool. Will also need new railing for deck.

Build composite deck

$2,500

Sylvania NSW, Australia

23rd Oct 2024

I’m considering building a deck, approx size is 7m x 1.5m. After quality composite decking, not the poor quality options. It will go in front of the three new windows shown on the right side in photo.

Put timber strip on kitchen kickboards

$150

Gymea Bay NSW, Australia

21st Oct 2024

We have some exposed nails along our kitchen kickboards after changing the floors. We want someone to install a strip of timber along the kickboards to cover the nail holes. We want the timber to match the colour of the floors as closely as possible. The total size of the area is approximately 8m in diameter so would need 8m of thin timber to xo er the space. We want someone who can source the materials for us.

Marine decking for boat

$3,000

Cronulla NSW, Australia

20th Oct 2024

Supply and install marine teak decking boat

Replace timber on deck

$200

Engadine NSW, Australia

19th Oct 2024

Replace 4 pieces of timber on a deck The deck is painted timber ! We have the paint. Each panel of timber is approximately 1-2 metres

Carpenter to help me remove old wardrobe and build shelves

$2,000

Como NSW 2226, Australia

19th Oct 2024

Looking for a carpenter who will help me to remove old wardrobe walls and build 2 shelves, details as below: - Check ensuring none of the beams and walls to be removed are load bearing - Remove highlighted old wardrobe sections - Patch holes where required - Build the shelf on the side A2 - Add extra 10-15com extension to existing wall A1 - Build behind the bed shelf marked B - Remove the air exhaust and patch wall - Continue the curved top corners where required - Put lighting and power place 4 spots - Fix flooring where required - Material - Remove garbage

Carpenter needed to resurface and cut a timber table .

$1,000

Caringbah South NSW 2229, Australia

18th Oct 2024

I have a very thick timber table measuring about 2400 x 100cm. I’m wanting it cut down both sides to make it more narrow plus sand and resurface the table.

5m by 5m new deck to install a sauna on top

$4,000

Oyster Bay NSW, Australia

18th Oct 2024

Build a new deck 5m by 5m.

Concrete Slab and Easy Shed assembly

$650

Kurnell NSW, Australia

18th Oct 2024

external concrete slab 880 X 3050 X 75 Easy shed Assembly instructions provided Tools needed: Drill bits (3mm steel, 10mm steel for concrete fixing,10mm masonary for concrete fixing) Concrete fixings String line Pop Rivet Gun

Stain in carpet removed

$150

Sutherland NSW 2232, Australia

17th Oct 2024

Just small stain need gone

Assemble Easy Shed

$400

Oyster Bay NSW, Australia

25th Sep 2024

Assemble Easy Shed Skillion Roof Garden Shed 3.75x1.9x2.1

Did a great job and had very good communication throughout the process would highly recommend

Install VJ panelling to a bedroom

$350

Engadine NSW, Australia

13th Sep 2024

We require a handyman to install half wall vertical join panelling to a bedroom (approx 2.7x3.7m room) with 20mm beading to sit on top of panelling. We will supply the 1050mm high panelling in 900mm wide sheets, liquid nails and silicone filler. Requirements: - will need own tools e.g. nail gun and nails - panelling to sit on top of existing skirting board - top of panelling will need to be level and may require some sanding - will need to cut panelling around 1x power point and 1x window frame If you are interested, please provide a quote and advise approx time to complete job, thanks.

Tulgaa was amazing! He did a great job in completing our VJ panelling in a great timeframe as well. He was efficient, professional and his work ethic was impeccable. Thank you so much Tulgaa, would definitely request work from him again.

Need to remove single cabinet from kitchen to place a dishwasher

$100

Kirrawee NSW, Australia

15th Aug 2024

We would like to add a dishwasher in our kitchen and need help with removing the cabinet to make space for the dishwasher. And we would also need the person to help with covering any gap post placing the dishwasher in

Matt was great to deal with. Was knowledgeable and on time for the job required. Thank you Matt for the support

Make a box for a large RC plane

$200

Kirrawee NSW 2232, Australia

30th Jul 2024

Need a carpenter with the right tools and experience to make a box out of MDF or something suitable to box a large RC plane. I will provide the materials The box will be approx 2.1 metres by 1.2 metres

Great works thankyou

Sand and stain deck and stairs

$1,000

Yowie Bay NSW, Australia

28th Jul 2024

Large deck and 30 stairs need to be sanded and stained.

Good job Phil. The deck looks good.

3x3 Easy Shed Assembly

$350

Gymea Bay NSW, Australia

19th Jun 2024

Install 3x3 EasyShed on rebated concrete slab which I’ve already poured.

Great guys. Solid job. Thanks!

Shave two doors down a little bit

$5

Miranda NSW, Australia

26th May 2024

Need someone to shave two doors down got new carpet installed which is thick and the bottoms of the doors drag quick easy job

Did a really good job thank you