Find experienced local carpenters in Hamilton

Gable Slider Model: EGSL-D3 Size: 3.75m x 3.00m x 2.18m Slab Poured 04 March 2024 2 x Concrete fittings packs Youll need your own tools I have some. Pop rivet gun needed and pop rivets I can assist as wingman, should be 2-4 hour job. Be good if youve assembled one of these before. I have all the instructions. Holes will need to be drilled into the concrete. Ask me any questions.

Build a single 3.6m room wooden frame/gyprock wall and hang 1 door/handle- materials supplied

Old shelves, broken cabinets - Due date: Flexible

Strip/clean (or sand, happy to get advice on this) and then re-stain timber deck plus connecting step. Roughly 5m by 5m Happy to discuss and/or vary the job to get the best results. I will provide and/or pay for supplies separately. - Due date: Before Friday, 27 October 2023

We have an ikea pax wardrobe arriving 15 July, and need assembly and installation asap after that. Pictures of the room attached along with design of wardrobe (4 cavities, 9 draws, plus some shelves). Dimensions are in the photo. Will need to be secured to studs in the wall. Ideally also installed on a frame, with trim on either side (there will be a 10cm gap between wardrobe and wall on either side) as well as baseboard to give built in look. If this is not possible, happy for just install without trim. Budget does not include cost of trim/frame. We can empty room before commencing. - Due date: Flexible

We have a few Boconcept cabinets that need to be installed on the walls of our home. - Due date: Flexible

External stain glass window needs repair. Glass sliding down due to age and wear. - Due date: Flexible

Need to replace the door seals in a commercial kitchen walk in chiller to prevent build up. - Due date: Flexible

New decking stained , old decking cleaned and stained , outdoor furniture cleaned and stained - Due date: Flexible

Being made by local joiner, looking for installer to assemble on site. - Due date: Before Tuesday, 18 October 2022

Looking for someone to add in two cupboards above my existing built-ins, including a floor to both. There is space extending above the existing cupboards, but it will need doors and a floor putting in. Measurements approx 1420 x 480, 1180 x 800. In Hamilton. Thanks - Due date: Flexible

We have recently renovated our bathroom and have space for a laundry left behind some sliding doors. We are looking for someone to put up some shelving and a benchtop over the washing machine. We have a pre purchased piece of wood for the benchtop. - Due date: Flexible

Im after a few people to help me with fencing/labouring/installing a kitchen/installing doors/carpet laying/tiling/installing floorboards/installing sinks and vanities/landscaping/paining inside and out/laying decking etc. Location is Hamilton east

Hey, Need a plasterer to do 2 joins, 2m long. One is a recess join and the other a butt join. Need to get done on Saturday. Job is in Hamilton Cheers

We require some joinery for the inside of our concealed laundry cupboard in our newly renovated bathroom. Will require a work bench and shelving. The cavity is about 3000x2500mm.

Need a piece of 30mm thick pine cut into a 90cm circle. Will supply the wood and can bring it to your place for cutting

We are looking for a person who knows to build a cement based for a shed we are building at the back of the garden. We will buy the materials and we just need a skilled person to help us to build the cement based and might be also help us to build the shed we bought online..