Find experienced local carpenters in West Melbourne

Shelves would be approximately 1.6m x 0.4m

I have ordered replacement draw panels (x2) and a set of doors which need to be installed in our outdoor kitchen area.

Installing 2 LACK wall shelves. Require screws and wall plugs as the one i have are not working. I tried to find wall stud but was unable to locate so would like these 2 shelves at shown location or other suitable location if no studs can be found at shown space.

- To build storage shelves - paint job - install a small room with a door in a 20 feet storage container. - Due date: Before Wednesday, 31 January 2024

A tenant has left a stain on my carpet it could be makeup but not sure photo attached, rest of carpet has been steam cleaned. - Due date: Needs to be done on Friday, 1 December 2023

Installation Area : 2395 Study desk bench top (width 600mm x height 720mm x length 1395) on wall of 1395mm and 1000mm storage tower (s high as possible) with 1 set of drawers.. A4 Size open shelves with 600mm clearance on wall. Closed cupboard above open shelves. Installation Area : 3280 Study desk bench top (width 600mm x height 720mm x length 3280) on entire wall.of 3280 with 3 set of drawers at the bottom A4 Size open shelves with 600mm clearance on wall. Closed cupboard above open shelves. - Due date: Flexible

(a) construct a wooden platform (approx 0.4m wide x 4m long x 0.2m high to support 4 planter pots on a roof deck (b) construct a simple wooden frame to support climbing plants up to a height of approx 2 and width of 2 m - Due date: Flexible

The wall is accidentally kicked a hole. Need to be fix, plaster and painted. Size is roughly 18cm Airtasker fee include labour fee, call out fee and any material/ hardware (include white paint) fee if need. Prefer to be done on 2nd or 3rd Oct, in between 11am-1pm. Or pls comment your prefer dates and time slot. Thank you

When installing a replacement hot water system in a built-in cupboard the plumber needed to cut a small width of plaster to fit the new unit in. I’d like a new door to fit the slightly wider space, the inner frame extended to fit the wider space, hinges installed for the new door, finishing of the edge of the plaster to make it flat and cutting of a small piece of skirting board to fit. I don’t needing painting done: I’ll get a painter in to match the paint later, and have the existing handle I can install later. The new door will need to be approx 560x2100x17mm. I’d like approximate costs for parts and labour, and please present options for the door material. No MDF or anything sensitive to moisture please. Note that this job is in the city and unfortunately there’s no onsite parking during the day. - Due date: Flexible

- Remove existing built in cupboard - Plaster and floor repair post cupboard removal - Work specifics and pricing negotiable Due date: Flexible

I need a coffee stain removed from my woollen carpet. The stain has been there for about 4-6 weeks. - Due date: Needs to be done on Wednesday, 31 May 2023

Looking to get this stainless steel bench fixed. In west Melbourne. Due date: Flexible, ASAP

I would like to get recycled/reclaimed timber floorboards installed. The site is a first floor warehouse conversion apartment. Very open plan - basically one room and a raised platform for the bedroom. Approximately 70m2. Currently the flooring is engineered boards installed over vapour barrier on concrete slab. I've included a picture of the look I'm after - happy for it to be somewhat rustic/have nail holes, thinking reasonably narrow boards perhaps 80mm wide. Parking is not an issue right out the front but there is no lift so access will be somewhat difficult. This will be done as part of a larger renovation and therefore all furniture will be removed from the apartment. Would like a quote for installation including finishing and sealing and a rough idea of ball park for materials - I realise this will depend on the boards actually chosen. I would be keen to get this done in late march. Price on this task is for coming and quoting. - Due date: Before Friday, 31 March 2023

I have a large wooden desk from Mark Tuckey. It looks a little tired and needs (I think) a oil finish and fixing of some recent damage to a corner of a drawer. It will need to be done in place (it is too large to move) - Due date: Flexible

I have designed and had the pieces CNC cut for 5 wall cabinets (1200x400x300) out of birch ply. I need someone to assemble these including sourcing and installing hinge hardware and finish them off - sanding and painting. I would ideally like the corner detail as shown in the third image (pieces have been cut on 45degree angle) The pieces are at my place in West Melbourne and ideally you would be able to collect them tomorrow morning (or I could drop them off if you're located in the inner north or western suburbs as I'll be driving out to Ballarat tomorrow. Price is exclusive of hardware/paint ect - Due date: Flexible

Build 2 shelves with hinges. Shelves need to be able to lay flat against the wall as access to switchboard is needed (see pic). For shelves to stay up, there should be a holding mechanism right opposite (see pic) Please include material costs in your offer Dimensions: 10cm thick for holding mechanism 90x150cm for shelving boards - Due date: Before Friday, 16 December 2022

Apply deck cleaner and apply three stains stains and deck cleaner provided - Due date: Needs to be done on Wednesday, 7 December 2022

My bike tires left stains on my light colored wooden floors and I’ve been unable to remove them. I’ve tried using magic eraser sponges with minimal success. I need someone with more experience to help me remove the stains. The stains themselves aren’t large and are limited to two places. - Due date: Before miércoles 23 de noviembre de 2022

I have a freezer display ( https://ozcoolers.com.au/products/liebherr-flat-glass-slide-lid-chest-freezer-efe-1152?currency=AUD&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQiAgribBhDkARIsAASA5buDlMM4TvQtGNZPju54v15dq-lrYr4lXzNOiGYHDqdiXYaKy1zRkXwaAustEALw_wcB ) I need welder to build up a stainless steel stand with movable bars in it to fit the ice cream tubs, who also needs to find a material suplier. The material and work fee are included in the price. Thank you

Need a stain removed from the carpet - Due date: Needs to be done on Friday, 4 November 2022