Find experienced local carpenters in Carnegie

I’d like some sort of door(s) put in to cover up this storage area under the stairs. See photo

My decking is 3.10m x 4.20m including 1 step. I require this to be sanded and stained to refresh.

Tin shed doors have broken of their runners. Need them replaced

Build sliding draws in kitchen pantry for easier access to the back of the pantry. This offer is for measure up, installation and material. I have roughly measured the cavity space needed for 3 sliding draws to be fitted. Height : 1105mm Width: 380mm Depth: 500mm

Carpentry - Install approximately 8 pieces of precut skirting in an office suite. Skirting was removed however must now be reinstalled. Existing skirting will need to be prepared (nails snipped / de nailed, glue removed from back, etc. ) prior to regluing and fixing. Work required to be completed by by end of Saturday 31st August. Refer photos.

Remove a outdoor Awning Window and replace with a new window. I will supply the window. Window measures 1510mm x 2110mm. Will also need rotted weather boards replaced on one side of the window with primed weather boards. They measure about 300mm wide. Airtasker to supply weatherboards. No painting required.

I require a colour bond shed, surrounding timber screen and water tank and functioning pump to be removed - shed dimensions are: 1900H, 3000D, 3050W. There is also a cement base (this can be included or I can remove this separately)

My dinning table is bigger for the space. I want cut side edges to fit the space

Existing pantry. Wanting 3 sliding draws installed for convenience and easier access

Need two good quality A-frame tents made, similar to the one shown in this video: https://youtu.be/k4JDnqMte-c

Hi The photos show that a piece of wood/laminate has come off front door step. I have cement gun but need someone to re affix this.

Build a bench seat. Timber is supplied. As you see in photos. The foundations of the bench seat are already done. Just looking for someone to finish the job.

We have a common roof with neighbour. Need Carpenter to install a timber wall in between the common roof.

Could you please give me a price on cornice install in Richmond? Aprox. 25 lineal metres (two bedrooms) Have already got Cornice and cornice cement.

My (concealed)dishwasher cabinet front was removed (by me) to fix an E6 error. Fixed the error but can't get the cabinet front back on securely as the screws can't grip into the MDF. Also the kick board needs to be resealed.

I would like our garden shed built and silicon sealed if possible please. It will go on pavers. We don’t have a mounting kit.

2.5m couch to be lifted over shed roof to the other side (without resting it on the roof of the shed). The chaise part is not attached. Cushions come off of course.

We need a white panel inserted into the gap so there is no gap between wall and wardrobe. Width approx 8-10cms

I need a cabinet maker to supply and install 2 x filler panels to my wardrobe to make it appear built in. Inspection prior would be needed for finish of wardrobe and exact measurements. Dimensions: Top panel: 2725W x25H Vertical side panel: 110W x 2740H

Planning to build a deck about 5.5x3.5m deck on our backyard, getting the engineering spec prepared. Need the building surveyor who can assist with issue if building permit